Please noted, this tool is for the rotor size of M38 x P1.5 Left Thread, inner size is about 36.6mm
Magneto Rotor Remover used on QW250 engines.
Remember that a flywheel is not intended to just "fall off" easily. So do not just keep turning the tool if nothing is happening. You risk either bending the bolt or stripping something if you just keep turning the tool if nothing is happening. Use the heavy hammer on the head of the bolt and then tighten again. Repeating this procedure until the flywheel is safely removed. Impact driver should only be used as a last resort!
Once the tool is tight - use a 3lb sledge hammer and firmly strike the head of the center bolt of the tool. This is should make removal easier. Make sure you measure the threads on your flywheel and compare to 38mm that this tool fits.
- 请确认该零件适用于您的具体车型及年份。同一名称的车可能因生产年份不同而使用不同零件。
- 建议购买前核对车辆手册，或联系客服确认兼容性。
- 图片、尺寸和描述仅供参考。因生产批次或拍摄光线，实物可能存在细微差异。
- 您收到的商品在功能上符合描述，但外观可能有轻微不同。
- 运费和税费不包含在内。 买家自行承担所有额外费用。
感谢您的推荐
请将我们的产品推荐给你的朋友 磁电机拉马M38 * P1.5反
相关商品
磁电机拉马M33 * P1.5正
MITLCF250-5038
Please noted, this tool is for the rotor size of M33 x P1.5 Right Thread, inner size is about 31.7mm..
QQ
微信