KTM690 M36*1.5拉码 正牙

Please noted, this tool is for the rotor size of M36 x P1.5 Right Thread, inner size is about 34.6mm

Remember that a flywheel is not intended to just "fall off" easily. So do not just keep turning the tool if nothing is happening. You risk either bending the bolt or stripping something if you just keep turning the tool if nothing is happening. Use the heavy hammer on the head of the bolt and then tighten again. Repeating this procedure until the flywheel is safely removed. Impact driver should only be used as a last resort!

Once the tool is tight - use a 3lb sledge hammer and firmly strike the head of the center bolt of the tool. This is should make removal easier. Make sure you measure the threads on your flywheel and compare to 36mm that this tool fits.

Flywheel Puller Ø36 X 1,5 Right KTM 690 fits the following vehicles:

• KTM 690 Rally models From 2007 to 2009
• KTM 690 SMC models From 2008 to 2009
• KTM 690 Duke models From 2008 to 2009
• KTM 690 Enduro models From 2008 to 2009
• KTM 690 Supermoto models From 2007 to 2008