EPS Steering Arm
- Brand: Mortch Motor
- Product Code: MICF9AWA-100001-20000
- Product Viewed: 18
- Availability: Pre-Order 1-2Weeks🔔
- Weight: 0.43kg
¥106.00 1 SOLD
| Shipping To： |
🔧 CFMoto EPS Steering Arm
📦 Part Number: 9AWA-100001-20000
⚙️ EPS Steering Arm · Electric Power Steering Arm · OEM Spec
📍 Installation Location: Steering system / Between EPS motor and tie rod
✅ Single unit · High-strength metal · Direct fit · Compatible with multiple CFMoto ATV models
This is a CFMoto OEM-spec EPS Steering Arm, part number 9AWA-100001-20000, sold as a single unit. This steering arm is a critical transmission component of the Electric Power Steering (EPS) system, installed between the EPS motor output shaft and the tie rod. It transfers the assist torque generated by the EPS motor to the tie rod, helping the driver steer with ease — an essential component for proper EPS system operation.
Over time, the original steering arm may suffer from spline wear, bearing damage, or deformation under load — leading to uneven steering assist, increased steering play, or noise. Replacing with an OEM-spec steering arm is essential to restore EPS steering system precision and reliability.
✅ OEM Quality Assurance: Manufactured strictly to CFMoto original technical standards. Made from high-strength metal, with spline specifications and mounting dimensions identical to the genuine part, ensuring a perfect replacement and reliable steering assist transmission.
This EPS Steering Arm (part number 9AWA-100001-20000, single unit) fits the following CFMoto ATV models:
- 2018-2024 CF1000ATR · CForce 1000
- 2024-2026 CF1000ATR-2 · CForce 1000 X10
- 2025-2026 CF1000ATR-2A · CForce 1000 X10 Overland
- 2025-2026 CF1000ATR-3 · CForce 1000 MUD
- 2025-2026 CF1000ATR-3L · CForce 1000 MV
- 2026 CF1000ATR-4L · GOES TERROX 1000 T3b
- 2018-2021 CF1000AU · CForce 1000 EPS Overland
- 2025-2026 CF1000AU-2 · CForce 1000 X10 Overland
- 2026 CF1000AU-4L · GOES TERROX 1000 EPS
- 2020-2025 CF1000AU-F · CForce 1000 Overland
- 2018-2025 CF800ATR-3 · CForce 850XC
- 2024-2026 CF800ATR-5 · CForce 850 X8 Touring
- 2018-2021 CF800AU-2A · CForce 850XC
- 2025 CF800AU-2A · CForce 850XC
- 2021-2025 CF800AU-2AF · CForce 800XC/CForce 850XC
- 2025-2026 CF800AU-3 · CForce 850 X8 Touring
📌 Fitment Note: This EPS steering arm fits the EPS steering system of the listed CFMoto ATV models. Sold as a single unit. If your specific model is not listed, please contact us with your VIN to confirm compatibility.
- ✅ OEM Original Spec: Manufactured to CFMoto original technical standards; spline specs and mounting dimensions match the genuine part exactly.
- 🛡️ High-Strength Metal: Made from premium metal with excellent torsional strength and fatigue resistance.
- 🔧 Precision Machined: Splines and mounting holes are precision-machined for accurate fit with EPS motor and tie rod.
- 💪 Direct Fitment: Direct replacement for the original part — no modifications required.
- 🔄 Direct Replacement: Replaces steering arms with worn splines, deformation, or damage.
• Steering assist is uneven — sticking or jerking during turns.
• Unusual noise from the steering system (metal knocking or grinding).
• Steering play has increased — excessive steering wheel free play.
• Severe spline wear — loose connection with EPS motor or tie rod (visual inspection).
• Arm is deformed or damaged when inspected during service.
If any of these occur, inspect and replace the steering arm promptly to ensure proper EPS steering system operation.
1. Confirm the arm is the correct 9AWA-100001-20000 matching the original.
2. Disconnect the battery negative terminal for safety.
3. Raise the vehicle with proper support and remove the front wheel for access.
4. Remove the tie rod-to-arm connecting bolt.
5. Use a suitable tool to remove the arm retaining nut and take out the old arm.
6. Clean the EPS motor output shaft splines and mounting surface.
7. Install the new arm onto the EPS motor output shaft in the correct orientation, ensuring proper spline engagement.
8. Install the retaining nut and torque to OEM specifications.
9. Connect the tie rod and torque the connecting bolt to OEM specifications.
10. Reconnect the battery, perform EPS system self-check and steering test.
Installation requires professional lifting equipment and mechanical skill; professional installation recommended.
- Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
- We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.
- Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
- Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.
- All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
- In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.
Thank You
Please tell your friends about our EPS Steering Arm