Magneto Rotor Remover M42 x P1.5 Left Thread

Brand: Mortch Motor
Product Code: MITLKTM390-5038

Product Viewed: 36

Availability: In Stock

Weight: 0.82kg

0 reviews / Write a review

¥110.00

Shipping To：

More Quotes

KTM Duke 390 / RC 390 Magneto Rotor Puller M42x1.5 Left Thread

Fits 2013-2021+ Models · Inner diameter approx. 40.4mm

Important: Left-hand thread tool · Turn all the way out before removal

📐 Specifications

Thread Size M42 × 1.5 Left Thread (Counter-clockwise)

Rotor Size M42 × 1.5 Left Thread

Inner Diameter Approx. 40.4mm

⚠️ Important Note: This tool is for rotors with M42x1.5 left thread. Please measure your flywheel thread size and confirm it is 42mm left thread before purchasing. The Duke 390 rotor has only 2-3 tooth patterns - be sure to turn it all the way out before removal.

🔧 Important Usage Instructions

Remember: A flywheel is not intended to just "fall off" easily. If nothing happens after tightening the tool, do not keep turning.

Continuing to turn risks bending the bolt or stripping threads. The correct procedure is:

Tighten the tool
Use a heavy hammer to strike the head of the center bolt
Tighten again
Repeat this procedure until the flywheel is safely removed

Impact driver should only be used as a last resort!

💡 Professional Tip: Once the tool is tight, use a 3lb sledge hammer and firmly strike the head of the center bolt. This should make removal easier.

🔧 Duke 390 Special Note: Since the Duke 390 rotor has only 2-3 tooth patterns, make sure to thread the tool all the way in to prevent slipping and thread damage.

🏍️ Compatible KTM Models

KTM Duke 390i ABS H2O 4T E3
2013-2016

KTM Duke 390i ABS H2O 4T E4
2017-2020

KTM Duke 390i ABS H2O 4T E5
2021-Present

KTM RC 390i ABS H2O 4T E3
2014-2016

KTM RC 390i ABS H2O 4T E4
2017-2020

KTM RC 390i ABS H2O 4T E5
2021-Present

📌 Note: This tool is specifically designed for KTM Duke 390 and RC 390 models with M42x1.5 left thread flywheels as listed above. For other models, please verify thread specifications before purchasing.

✅ Professional Flywheel Removal Tool: Using the correct thread specification (M42x1.5 left thread) is essential for safe flywheel removal. This tool is specifically designed for KTM Duke 390 and RC 390 series. When combined with the proper "strike-tighten" technique, it allows for safe and efficient flywheel removal. Please note the special design of Duke 390 rotor with only 2-3 tooth patterns.

⚠️ Important: Please measure your flywheel thread size before purchasing to confirm it is M42 × 1.5 left thread. This tool is NOT suitable for right-hand threads or other thread sizes. Be sure to thread the tool all the way in to prevent thread damage.

🔧 Compatibility Notice

Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.

📄 Product Disclaimer

Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.

💰 Import Duties & Taxes

All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.

📌 Order Confirmation: By completing your purchase, you acknowledge that you have read, understood, and agreed to all terms above. For any questions, please contact our support team prior to ordering.